Parker MX80S Series, Руководство по эксплуатации продукта

Страница: 6 / 36

MX80S Series Product Manual
6
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
Return Information
Returns
All returns must reference a “ R eturn M aterial A uthorization ” (RMA) number. Please call your local au-
thorized distributor or Parker Customer Service Department at 800 - 245 - 6903 to obtain a “ RMA ” number.
Repair Information
Out - of - Warranty Repair
Our Customer Service Department repairs Out - of - Warranty products. All returns must reference a
“ RMA ” number. Please call your local authorized distributor or Parker Customer Service Department at
800 - 245 - 6903 to obtain a “ RMA ” number. You will be notified of any cost prior to making the repair.
Warnings and Precautions
Hot Surfaces
DO NOT touch rotary motor coils located on the MX80S after high duty operation. Motor tempera-
ture may approach 60°C. The unit itself may become warm or hot to the touch.
Electrical Shock
DO NOT take apart or touch any internal components of the positioner while unit is plugged into an
electrical outlet. SHUT OFF power before replacing components to avoid electrical shock.
Pinch Points
Unit may have a pinch point because the top extends over the base of the table. Proper care should
be exercised.
Vertical Operation
Depending upon your load and screw selection the carriage and load my ‘ backdrive ’ in power loss
situations potentially causing product damage or personal injury.
General Safety
Sometimes positioners move without warning, keep all personnel away from dynamic travel range of
positioner.
Strain Relieve Electrical Components
All electrical components (such as motor, encoders and limit/home switches) must be strain relieved.
Failure to strain relieve electrical wires or cables may result in component failure and/or possible
personal injury.