Parker MX80S Series, Руководство по эксплуатации продукта

Страница: 5 / 36

MX80S Series Product Manual
5
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
Chapter 1 - Introduction
Product Description
MX80S Positioner
The MX80S miniature positioner is the screw driven member of Daedal ’ s MX80 family. Like its counter-
parts, the MX80L linear motor driven stage and MX80M manual stage, the MX80S is designed for
OEM applications requiring reliable linear positioning in space restricted applications. It is the compli-
mentary product that bridges the product spectrum between the high dynamic linear motor perfor-
mance of the MX80L, and the manual precision of the MX80M. The MX80S can be supplied with a
high efficiency leadscrew drive capable of reaching 200mm per second velocity, or a precision ground
ballscrew drive offering axial thrust to 123N. The leadscrew drive employs a teflon® coated leadscrew
with a preloaded nut to produce extremely smooth linear translation. A choice of three leads provides
improved opportunity for matching desired velocity / resolution requirements. The 2.0mm lead
ballscrew
stage offers high performance 24/7 operation with a thrust load capacity of 123N (28lb.) and velocity to
100 mm/second at 100% duty cycle.
Unpacking
Unpacking
Carefully remove the positioner from the shipping container and inspect the unit for any evidence of
shipping damage. Report any damage immediately to your local authorized distributor. Please save
the shipping container for damage inspection or future transportation.
Incorrect handling of the positioner may adversely affect the performance of the unit in its application.
Please observe the following guidelines for handling and mounting of your new positioner.
DO NOT allow the positioner to drop onto the mounting surface. Dropping the positioner can gener-
ate impact loads that may result in flat spots on bearing surfaces or misalignment of drive com-
ponents.
DO NOT drill holes into the positioner. Drilling holes into the positioner can generate particles and
machining forces that may effect the operation of the positioner. Parker will drill holes if neces-
sary; contact your local authorized distributor.
DO NOT subject the unit to impact loads such as hammering, riveting, etc. Impacts loads generated
by hammering or riveting may result in flat spots on bearing surfaces or misalignment of drive
components.
DO NOT lift the positioner by cables or cable management system. Lifting positioner by cables or
cable management system may effect electrical connections and/or cable management assem-
bly. The unit should be lifted by the base structure only.
DO NOT expose positioner to mist, spray or submersion in liquids.
DO NOT disassemble positioner. Unauthorized adjustments may alter the positioner ’ s specifications
and void the product warranty.