background image

Frequently Asked Questions 

Parflex MiniKrimp™

Where is the serial number located on my MiniKrimp™ machine?

The first place to look is on the top surface of the Hardened Steel Sleeve (Part # 015302).  No disassembly is 
required but you may need to remove the Die Ring and Die to read it.  

If your MiniKrimpTM machine was produced before January 2007 then the serial number is stamped on 
the bottom of the Hardened Steel Sleeve.  In order to read it you must remove, from the bottom of the 
MiniKrimpTM machine, the Retention Ring (Part # 822031), the Spring (Part # 822012), and the Die Separator 
(Part # 822011) in that order.  For assembly detail and parts list please see attached diagram. 

Where do I purchase replacement parts and components for my MiniKrimp™machine?

Not all MiniKrimpTM parts and components are sold by Parflex Division for field repair.  All questions about 
replacement parts and components (excluding the Enerpac parts listed below) should be directed to the 
Technical Services Department of the Parflex Division.  For details regarding Accessories, Trouble Shooting, 
Warranty Policy and Safety Guide refer to the MiniKrimpTM Technical Manual (Bul. 4660-MKD). 

 

Where do I purchase Enerpac Replacement Oil for my MiniKrimp™ machine?

The Parker Parflex Division does not offer Enerpac Replacement Oil as one of our products.  Refer to the chart 
below for ordering options:

Supplier

1 Quart Part #

1 Gallon Part #

Contact Number

Website

Enerpac

HF-100

HF101

1-800-558-0530

www .enerpac .com

Grainger

3KD75

3KD76

1-888-361-8649

www .grainger .com

Note: In order to comply with the Enerpac warranty policy Enerpac Replacement Oil must be used in all  
Enerpac Products. 

Who do I contact for quality or warranty repairs? 

For warranty or repairs on any of the components listed below, please contact A&A Hydraulics, the preferred 

authorized Enerpac Service Center,  at (216)362-4000. 

MiniKrimp Model

Component Description

Parflex Part #

Enerpac Part #

94C-001-PFD

Cylinder

015303

RSM301U001

Hand Pump

015301

P142

94C-002-PFD

Cylinder

015303

RSM301U001

Air/Hydraulic Pump

025399

025399

For warranty or repairs on any other MiniKrimp™ parts or components please contact the Quality Control 
Department of the Parker Parflex Division to request an Authorization to Return (ATR) number.

12  

13  

Содержание MiniKrimp 94C-001-PFD

























Отзывы: