Parker MiniKrimp 94C-001-PFD, Техническое руководство

Страница: 13 / 24

Parker Hannifin Corporation | Parflex
®
Division | Ravenna, Ohio | parker.com/pfd
For detailed ordering information, please consult price list or contact Parflex
®
Division.
Hose
A
Tubing
B
Coiled Air
Hose
& Fittings
C
Transportation
D
Fittings
E
Tooling
, Equipment
& Accessories
F
General T
echnical
G
10
Select proper Parkrimp die set.
(Reference Crimp Die Selection
on Crimpsource online at
www.parker.com/crimpsource)
Die Selection
Remove pusher from shoulder bolt.
Using a premium, quality, lithium-
base grease, apply a thin layer of
grease on bowl of crimper base
plate.
Lubricate Bowl
Replace pusher onto shoulder bolt.
Crimp Die – Place die set into
bowl.
Die Ring –
Place applicable die
ring on top of die. Position ring
so it is centered on die.
(Reference Crimp Die Selection
on Crimpsource online at
www.parker.com/crimpsource)
Die & Spacer Ring
Pakalign ® Feature
Assemble hose – Insert
hose and fitting from bottom
of crimper and up through die
set. Position fitting so bottom
of fitting skirt rests on die step
(PARKALIGN® feature).
Note
Parker Hannifin will not accept
responsibility for the operation
of or provide warranty coverage
for a crimper that is operated
by a power unit other than
equipment supplied by Parker
Hannifin for the express purpose
of operating the crimper.
Warning
Keep fingers and hands away
from die-pusher area. Failure
to do so may result in personal
injury.
While holding hose and fitting
in position on die step, crimp
fitting onto hose until die ring
contacts base plate.
Crimp
MiniKrimp
™
Fitting Assembly Procedures
Parkalign
®
Feature
Permanent Crimp
Series 56 (cont.)
4
5
6 7