background image

 

Parker Hannifin Canada 
Electronic Controls Division  
1305 Clarence Avenue 
Winnipeg, MB R3T 1T4 Canada 
office   +1 204 452 6776 
Fax 

+1 204 478 1749 

http://www.parker.com/ecd 
 

DRAFT DISCLAIMER: 

This version of the manual is in draft form and is subject to change. Parker 

Hannifin is not responsible for content that is incorrect or incomplete. Drafts may be updated, 
replaced, or made obsolete by other documents at any time. 
 

Copyright 2015 © Parker Hannifin Corporation.

 All rights reserved. No part of this work may be 

reproduced, published, or distributed in any form or by any means (electronically, mechanically, 
photocopying, recording, or otherwise), or stored in a database retrieval system, without the prior 
written permission of Parker Hannifin Corporation in each instance. 
 
 
 

 

 Warning! 

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS 
DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY 
DAMAGE. 

 

This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized 
distributors provide product and/or system options for further investigation by users having technical expertise.

 

The user, through its own analysis and testing, is solely responsible for making the final selection of the 
system and components and assuring that all performance, endurance, maintenance, safety and warning 
requirements of the application are met. The user must analyze all aspects of the application, follow applicable 
industry standards, and follow the information concerning the product in the current product catalog and in any 
other materials provided from Parker or its subsidiaries or authorized distributors. 

 

To the extent that Parker or its subsidiaries or authorized distributors provide component or system options 
based upon data or specifications provided by the user, the user is responsible for determining that such data 
and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the 
components or systems. 

 

Offer of Sale 

The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries 
or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the "Offer of 
Sale" elsewhere in this document, or available at www.parker.com. 

 

 

Содержание CM2115



























































































Отзывы: