Parker AC30V Series, Руководство пользователя, Страница: 23 / 337

4-5
Installation
AC30V series Variable Speed Drive
MOUNTING THE DRIVE
The unit must be mounted vertically on a solid, flat, vertical surface, or mounted inside a suitable cubicle, depending upon the required level of
EMC compliance - refer to Appendix F: “Technical Specifications”.
VENTILATION
The drive gives off heat in normal operation and must therefore be mounted to allow the free flow of air through the ventilation slots and heatsink.
Maintain minimum clearances for ventilation as given in the tables below to ensure adequate cooling of the drive, and that heat generated by
other adjacent equipment is not transmitted to the drive. Be aware that other equipment may have its own clearance requirements. When
mounting two or more AC30V units together, these clearances are additive. Ensure that the mounting surface is normally cool.
Through-Panel Mount Product/Application (Frames D, E & F)
(Europe: IP2x, USA/Canada: Open Type).
The drive can be mounted in a suitable cubicle.
Figure 4-4 Air Clearance for a Through-Panel Mount Product/Application, Frame D Illustrated.
Clearances for Through-Panel Mount IP20 Product (mm)
A
B C
10 75 75 minimum (cable entry)
Heatsink Control
Isolated forced
air flow
Natural air flow
(not fan assisted)
Panel