Parker AC20 Series, Руководство по установке оборудования

Страница: 143 / 154

DOC-0017-04-EN: AC20 Series - Hardware Installation Manual
DOC-0017-04-EN-A 22.03.2023 143 (154)
Ex24V Auxiliary Input
Allows for the partial power-up of the product without mains power applied, for programming of the drive
using the DSELite programming tool through the Ethernet port, or communication with the drive through the
Anybus Comms option. µSD Card port, display, keypads and digital I/O are also active.
Terminal Idents:
0V, 24V
Input Voltage:
24V +/-10% (up to a maximum ambient temperature of 40°C)
24V +5 / -10% (up to a maximum ambient temperature of 45°C)
Indicative Input Current:
@Nominal 24V:
- Control Board only: 45mA
- Control Board with EtherCAT comms option fitted only: 85mA
Isolated:
No
Over Voltage Protection:
No
Reverse Voltage
Protection:
No
STO Inputs
Terminal Idents:
STOA, STOB, referenced to 0V
Nominal Input Voltage:
24V PELV (with energy source class 3, according to IEC 62368-1)
Maximum Input Voltage:
25.2V (26.4V in a maximum operating ambient of 40°C)
Recommended Input
Voltage for Logic Low
Level:
0V – 5V (or open circuit)
Recommended Input
Voltage for Logic High
Level:
15V – 24V
Indetermined Input
Range:
5V – 15V, function is undefined
Typical Input Current:
9mA @ 24V
STO Input Operability:
Always Active (i.e., STO cannot be disabled by the drive firmware)
STO User Input A Logic
Level:
0V or open circuit = STO Activated
24V = STO Disabled
STO User Input B Logic
Level:
0V or open circuit = STO Activated
24V = STO Disabled
Isolation:
Channel A & B to SELV: Galvanic Isolation.
Channel A to Channel B: Non-isolated