background image

Refrigerating Specialties Division

1

ISO 9001:2000 CERTIFIED

ADAPTOMODE WELD-END
PRESSURE REGULATORS

Types:  A4W, A4WE, A4WS, A4WB,

 

A4WD, A4WP, A4WOE, A4WR

Port Size 125-200mm (5”-8”)
FOR AMMONIA, R12, R22, R502 
AND OTHER COMMON REFRIGERANTS

FEATURES

•  Cast Steel Body – Strong, Lightweight.

•  Welds Directly in the Line – No Flanges.

•  Removable Seat – Serviceable from Top Side.

•  Streamlined Fluid Flow Pattern.

•  Unique Modular Construction – Same Modules 

as A4A Series.

•  Interchangeable Parts.

•  Easy to Service.

•  Pilot Operated Characterized Modulating Plug for 

Precise Control.

•  Suitable for All Common Refrigerants and Oil.

•  27.6 bar (400 psig) Maximum Rated Pressure (MRP).

•  Many Control Variations are Possible with the Use 

of a Few Modules and Kits.

•  Stainless Steel Diaphragm.

•  Chrome Plated Pilot Seat.

•  Manual Opening Stem.

Index

   Item  ...................................................................................... Page
   A4W  .............................................................................................1
   A4WB  ...........................................................................................3
   A4WD ............................................................................................4
   A4WE ........................................................................................... 2
   A4WOE ...................................................................................... 2, 4
   A4WP ............................................................................................4
   A4WR ............................................................................................5
   A4WS ............................................................................................3
   Adjustment, Range  ......................................................................2
   Assembly ......................................................................................6
   Dimension Drawings ............................................................ 12, 13
   Disassembly .................................................................................6
   Electrical ......................................................................................5
   Installation ...................................................................................5
   Mintenance and Service ...............................................................8
   Manual Opening Stem  ............................................................  8, 9
   Pressure Setting Ranges .............................................................2
   Safe Operation  ..........................................................................  14
   Torques, Fastener and Seat  ........................................................7
   Trouble Shooting  ........................................................................ 9
   Warning  .....................................................................................14
   Warranty .....................................................................................14

BULLETIN 23-20D

A4W Series

August 2007

Installation, Service and Parts Information

Description

These heavy duty, cast steel bodied (ASTIM No. A352 Grade 
LCB), pressure regulators weld directly in the line and do not 
require fl anges.

They are used for control of Ammonia, R-12, R-22 and R-502, 
and other common refrigerants, certain oils and other fl uids 
approved for use in refrigeration systems.

The A4W Series Regulators are pilot operated, using upstream 
pressure for the moving force, and require a minimum 0.14 bar 
(2 psi) pressure drop to fully open. The basic Type A4W is an Inlet 
Pressure Regulator which tends to open on a rise in upstream 
pressure above set-point and to close on a drop in pressure 
below set-point.

These valves can be ordered with the Type RSW Strainer to be 
welded directly to the inlet of any of the Type A4W Regulators 
or use a 13mm (1/2”) Type RSF Strainer in only the pilot circuit 
of a Type A4WE or A4WR version of the regulator.

The A4W Series of regulators uses the same Modules as does 
the A4A Series to confi gure many possible variations.

Seal Cap

Manual 
Opening 
Stem

Power 
Piston

Removable Seat

Seal Cap

Adjusting Stem

Range Spring

Diaphragm

Gauge Port

Pilot Seat

Modulating 
Plug

Closing 
Spring

Fig. 1 - A4W, A4WE

050405

Содержание A4W Series















Отзывы: