background image

Parker Hannifi n Corporation 

l

 Refrigerating Specialties Division

2445 South 25th. Avenue 

l

 Broadview, IL 60155-3891

Telephone: (708) 681-6300 

l

 Fax: (708) 681-6306 

14

Warranty

All Refrigerating Specialties Products are warranted against 
defect in workmanship and materials for a period of one year 
from date of shipment from factory. This warranty is in force 
only when products are properly installed, fi eld assembled, 
maintained and operated in use and service as specifi cally 
stated in Refrigerating Specialties Catalogs or Bulletins for 
normal refrigeration applications, unless otherwise approved 
in writing by Refrigerating Specialties Division. Defective 
products, or parts thereof, returned to the factory with 
transportation charges prepaid and found to be defective by 
factory inspection will be replaced or repaired at Re frigerating 
Specialties’ option, free of charge, F.O.B. factory. Warranty does 
not cover products which have been altered or repaired in the 
fi eld; damaged in transit, or have suffered accidents, misuse, 
or abuse. Prod ucts disabled by dirt or other foreign substances 
will not be considered defective.

THE EXPRESS WARRANTY SET FORTH ABOVE CONSTITUTES 
THE ONLY WARRANTY APPLICABLE TO REFRIGERATING 
SPECIALTIES PRODUCTS, AND IS IN LIEU OF ALL OTHER 
WARRANTIES, EX PRESS OR IMPLIED, WRITTEN OR ORAL, 
INCLUDING ANY WAR RANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE. No employee, agent, 
dealer or other person is authorized to give any warranties 
on behalf of Refrigerating Specialties, nor to assume, for 
Refrigerating Specialties, any other liability in connection with 
any of its products.

Safe Operation (See also Bulletin RSBCV)

People doing any work on a refrigeration system must be 
qualifi ed and completely familiar with the system and the 
Refrigerating Specialties Division Products involved, or all 
other precautions will be meaningless. This includes reading 
and understanding pertinent Refrigerating Special ties Division 
Product Bulletins, and Safety Bulletin RSB prior to installa tion 
or servicing work.

Where cold refrigerant liquid lines are used, it is necessary 
that certain precautions be taken to avoid damage which could 
result from liquid expansion. Temperature increase in a piping 
section full of solid liquid will cause high pressure due to the 
expanding liquid which can possibly rupture a gasket, pipe 
or valve. All hand valves isolating such sections should be 
marked, warning against accidental closing, and must not be 
closed until the liquid is removed. Check valves must never be 
installed upstream of solenoid valves, or regulators with electric 
shut-off, nor should hand valves upstream of solenoid valves or 
downstream of check valves be closed until the liquid has been 
removed. It is advisable to properly install relief devices in any 
section where liquid expansion could take place.

Avoid all piping or control arrangements which might produce 
thermal or pressure shock.

For the protection of people and products, all refrigerant must 
be removed from the section to be worked on before a valve, 
strainer, or other device is opened or removed.

Flanges with ODS connections are not suitable for ammonia 
service.

WARNING

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF 
THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR 
RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND 
PROPERTY DAMAGE.

This document and other information from Parker Hannifi n 
Corporation, its subsidiaries and authorized distributors 
provide product and/or system options for further investigation 
by users having technical expertise.  It is important that 
you analyze all aspects of your application and review 
the information concerning the product or system in the

current product catalog.  Due to the variety of operating 
conditions and applications for these products or systems, 
the user through its own analysis and testing, is solely 
responsible for making the fi nal selection of the products and 
systems and assuring that all performance, safety and warning 
requirements of the application are met.

The products described herein, including without limitation, 
product features, specifications, designs, availability and 
pricing, are subject to change by Parker Hannifi n Corporation 
and its subsidiaries at any time without notice.

Содержание A4W Series















Отзывы: