Parker Hiross StarlettePlus-E Series, Руководство пользователя

Страница: 11 / 118

English
3 / 6 SPE004-100
5 Control
QS
Main power switch
UP button: press to increase the value of a selected
parameter
DOWN button: press to reduce the value of a selected
parameter
esc
ESC button :returns to the previous level
set
SET button : one single press to see the alarms, press
for more seconds to enter Menu (Service e Factory)
(lit) Dew point correct
(Flashing) warning dew point high/low
(off) alarm dew point
(lit) Condensate drain ON
(off) Condensate drain OFF
(lit) Multiple alarms
(Flashing) Warning “maintenance”
Degree
5.1 Parameter settings
There are two levels of protection for parameters:
a) User (U): with immediate access,
User-changeable;
b) Password protected Factory/Service (F/S): password required
for access;
Factory-set parameters.
Condensate drain
There are two operating modes:
a) TIMED (TIm) - with draining at intervals and settable time;
in this confi guration keep pressed to force the drain to
work;
b) EXTERN (CON) - if there is an external drain.
For chosing the set proceed as follows::
Press button
set
over 5 seconds to enter on menu U.
Using buttons and select “CHd” and press
set
to con-
fi rm.
Using buttons and select “TIm” or “CON” .
Press
esc
to confi rm and exit.
In the same way it is possible to change interval and discharge
times of the drain.
Parameter table
Code Defi nition De-
fault
Min Max.
dON Time ON Drain 5 1 60
dOFF Time OFF Drain 120 20 2700
CHd Confi guration drain TIm TIm CON
ALC relay alarm/warning
ON = relay energised for
alarms/warnings
OFF = relay energised only
alarms
ON OFF ON
Flow Chart
set
Y
Y
Y
>5 sec.
Menu
User
CHd
set
Y
TIm
Y
CON
Y
esc
Alarms/Warnings
When an alarm is ON, the “alarm/warning code” fl ashing on dis-
play.
Multiple alarms appear in sequence. The symbol appears .
In any case you can press
set
to see the alarms, using the but-
tons and .
Code Description alarm / warning
--- No alarms present
HdP Alarm High Dew point
LdP Alarm Low Dew Point
DSE Alarm sensor B1 faulti/disconnected
H Warning High Dew point
L Warning Low Dew point
Press
esc
to exit.
Flow Chart
set
Y
Y
Y
<5 sec.
Code 1
Alarm
Warning
esc
Code 2
Alarm
Warning
Code....
Alarm
Warning
Y
Y
esc
esc
.