Page 27/71
Opening the maintenance door
D.
Put the maintenance card in the card slot.
When a maintenance card is detected, the terminal switches automatically to maintenance mode.
E.
If the maintenance card requires the identification code, enter it and validate.
F.
If necessary, enter the identification code with the user keypad and validate with the
V
key.
When the identification is successfully done, the maintenance menu ("reduced" version) is displayed on the screen.
G.
To unlock the door, select the
Padlock command
function of the
Maintenance
menu (function
116
).
Padlock command 116
H.
Remove the maintenance card from the reader.
I.
Operate the bolts with the square key. Open the maintenance door and hold the bolts in raised position
for a few seconds until the electronic lock actuator gets back in position (the operator hears a spring
noise).
Holding the bolts in raised position with the square key for a few seconds after opening the door is
necessary to avoid some technical issues associated with an incorrect repositioning of the electronic lock
actuator.
