background image

SERVICE MANUAL

Color Digital Camera

VPC-X360E

VPC-X360EX

(Product Code : 126 251 01)
(U.K.)

(Product Code : 126 251 02)
(Europe)
(PAL General)

Contents
1. OUTLINE OF CIRCUIT DESCRIPTION .................... 2
2. DISASSEMBLY ........................................................ 12
3. ELECTRICAL ADJUSTMENT .................................. 15
4. TROUBLESHOOTING GUIDE ................................. 20
5. PARTS LIST ............................................................. 21
    CABINET AND CHASSIS PARTS 1 ........................ 21
    CABINET AND CHASSIS PARTS 2 ........................ 22
    ELECTRICAL PARTS .............................................. 23
    ACCESSORIES ....................................................... 28
    PACKING MATERIALS ............................................ 28
CIRCUIT DIAGRAM (Refer to the separate volume)

The components designated by a symbol (   !   ) in this schematic diagram designates components whose value are of

special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part

designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.

CAUTION : Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.

NOTE : 1. Parts order must contain model number, part number, and description.

2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.

Design and specification are subject to change without notice.

SR662/E, EX, U

REFERENCE No. SM5310090

FILE NO.

PRODUCT SAFETY NOTICE

VPC-X360

(Product Code : 126 251 03)
(U.S.A.)
(Canada)

Содержание VPC-X360






























Отзывы: