Page 34/71
6.7.2
Procedure
Remove the slide end stop to move the key introduction end stop. It is located under the slide, near the pipe
fixation.
A.
Remove the two M3 screws / nuts (3) fixing the end stop (4) to the slide.
B.
Remove the slide (1) from the collection head.
Collection head
C.
Push the key introduction end stop (1).
D.
Remove the collection key.
Removing the collection key from the slide
E.
Slide the slide on the collection head to put it back in place.
F.
Fix the slide end stop with the two screws / nuts.
