6
①
Camera name of the alarm-triggered channel.
②
Touch this button to turn on/off cursor.
③
Line selecting: There are 5 lines to be selected. Line U (up), Line D (down), Line L (left), Line R (right)
and ALL. The button turns green if selected. You can use remote control to operate.
④
There are 4 directions to adjust the shape of the cursor, Up, Down, Left and Right.
If Line U (the green one) or Line D (the red one) is selected, the selected line can be moved with
these directions.
If Line L or Line R is selected, the top point of the selected line can be moved to left or right with
Direction Up and Direction Down, and the bottom point of the selected line can be moved to left or
right with Direction Left and Direction Right.
⑤
Lines of cursor:The selected one will be thickened for three times. The two lines in the middle will not
be processed.
Touch OK to save the settings and exit. Cancel to exit without saving any settings.
Priority
: The default configuration is shown below.
