7
Algo Switch
：
If it is set On, when the expected collision time TTC Thresold(s) is less than the configured
time, the forward collision alarm and blind spot pedestrian detection alarm will be triggered. If it set Off,
the alarm will not be triggered if the expected collision time TTC Thresold(s) is less than the configured
time.
Audio Switch
：
If it is set On, audio warning will be sent when forward collision alarm and blind spot
pedestrian detection alarm are triggered; if it is set Off, no audio warning will be sent when forward
collision alarm and blind spot pedestrian detection alarm are triggered.
TTC Thresold(s)
：
Time-to-collision, the default configuration is 1.4.
Sensitivity
：
ensitivity level, there are three levels Low, Medium, High, the default is low.
Speed
：
Set the FCW working speed value. When it is set to 5, it indicates that the FCW can only start
when the vehicle speed is larger than or equal to 5km/h. The default value is 30.
FCW installation:
installed in front of the windshield,the installation height is about 1.4h.
FCW Installation Diagram:
Referring to the following models, select the glass near the red dot as the installation location, and clean
it with a duster. Then install the camera horizontally. If the mounting location needs to be elsewhere,
please make sure the windshield wipers can reach the glass facing the camera, so the part that camera
sees through can remain clean.
