6
: Touch to increase trigger value. The bigger the value,, the lower the priority.
: Touch to decrease trigger value. The smaller the value , the higher the priority.
Alarms with higher priority will be triggered first.
1 stands for the highest priority, and 6 the lowest.
If two alarms A and B are triggered at the same time, and A’s priority is higher than B’s, then A will
be recorded first. After A finishes the recording, if B is still being triggered, B will be recorded then. If
B is no longer being triggered, it will not be recorded.
If alarm B is triggered while recording, and alarm A, whose priority is higher than B, is triggered then,
A will be displayed and B will be recorded.
11.8 Update
For single device
Step 1: format the SD cards in DVR, it will get the correct format to recognized by DVR; Copy the files to
the USB disk or SD card/upgrade/packet/local directory, ; insert the USB disk or SD card into the DVR.
Step 2: Power off the DVR and reboot it, then it will upgrade automatically. Or go to Menu -> System ->
Update->Software, touch OK to confirm the upgrading..Use either way to start the upgrade
process.
