3
8.2 Cyclic Rec
Cyclic Rec.
：
When “Cyclic Rec” is set to ON, new recording files will overwrite the previous ones when
the disk is full. Otherwise, it will stop recording when the disk is full.
This function is “ON” by default, and will overwrite all video files, including event video files.
8.3 Event Rec
Event Rec.:
Event recording refers to the alarm recording triggered by events including motion detection,
G-Sensor, alarm 1 ~ 6, panic button and over speed, FCW alarm,DMS detection alarm, LANE departure
alarm. If the Event Rec is set to ON and corresponding alarm parameters are set, event recording will be
activated when the events above are triggered. If the Event Rec is set to OFF, event recording will not be
activated even if an alarm is triggered.This function is “ON” by default.
Event Rec. Lock:
reserved
Filter Time:
Time filtering. As shown in the figure, if the same alarm is triggered continuously, the DVR
generates an alarm message every 60s and checks whether a new alarm recording is generated every
60s. After the DVR is connected to the Internet, the alarm information will be sent to the server. Filter
Time minimum setting 1s, the maximum can be set to 300s, the default value is 60s.
8.4 Video Quality
