24
CLEANING NOZZLE INSTALLATION
Before installing nozzles flush all lines by:
a. Start pump, run for 10 minutes before installing the water valve module.
b. Install the water valve module and let valve cycle to flush out any debris remaining in each line.
INSTALLING NOZZLE IN-FLOOR
ECO NOZZLE WITH TWIST LOCK CAP
SYSTEM START UP
1. Select nozzle size from
pool plan and using the
nozzle tool to twist on
caps.
4. Turn cap clockwise until it
snaps into place. Be sure
o-ring is pushed all the
way up to top flange.
1. Snap the nozzle onto the install tool (part #004-
527-5452-00) by twisting. Start with nozzle
closest to the valve and as red plaster caps blow
out install nozzles.
2. Place the nozzle inside
the nozzle tool to hold
it from spinning as you
twist on the cap.
2. Install nozzle in body by turning clockwise one-quarter turn.
3. Place the cap on the
nozzle. It will only on
and twist one way.
