Paragon SYMPHONY CF, Руководство пользователя

Страница: 8 / 24

8 LT5245 (2:02/09)
Paragon Symphony CF Users Instructions
SECTIONTHREE Cleaning Continued
REMOVING GLASS PANEL
• Remove the trim, which is held in position with magnets.
• Lift and remove the inner fascia panel.
• Remove the glass fixing clamp secured with three
securing nuts. Take care to support the glass panel
when removing the fixing clamp. The glass should be
place in a safe place to prevent damage.
• Once the fuel bed has been laid reassemble in reverse
order.
SECTION FOUR Fuel Bed Cleaning and Layout
• Before you clean any part of the appliance ensures that the appliance is turned off and cold.
• Use only the fuel bed components provided and no additional parts must added.
• Incorrect positioning of the fuel bed components could result in the staining of the glass panel.
Important: - Refer to the ‘Health & Safety Notice located on page 3 of this booklet before
cleaning or replacing any refractory material.
• The fuel bed components are delicate and they should be handled with great care.
• The loose parts and moulded shapes may be removed for cleaning. They can be brushed very
gently with a soft brush to remove dust or any deposits.
• A vacuum cleaner may only be used after the loose components and moulded shapes have been
removed.
CARE SHOULD BE TAKEN TO AVOID CONTACT WITH THE REFRACTORY LINING THIS IS A
DELICATE SURFACE AND SHOULD
NOT BE WIPED OR RUBBED.
It is important that all the fuel bed moulded shapes are positioned as shown in these
instructions.