Paragon Atlanta EM3333, Инструкция по эксплуатации

Страница: 16 / 35

F.Y.I.:
•
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this
case the alarm will be repeated automatically after 24 hours.
•
Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the
alarm signal is heard.
Switching off the alarm signal
•
The alarm sound when the trigger,
press any button buttons or touch the “
SNOOZE
”
character position and hold for more than 2 seconds to stop the alarm signal.
Snooze function:
•
When the time is up to the alarm, touch the “
SNOOZE
” character position, the alarm signal
stops, and enter the SNOOZE mode. After the snooze time is counted, the alarm will ring
again.
•
In snooze mode, press any button buttons or touch the “
SNOOZE
” character position and
hold for more than 2 seconds to exit the snooze mode.
F.Y.I.:
•
When the snooze function is set to OFF, when the time is up to the alarm, touch the
“
SNOOZE
” character position does not have this snooze function.
Temperature Detection:
•
Indoor temperature measuring range: -9.9°C (+14°F) ~ +50°C (+122°F), LL °C(°F) will
displayed if value lower than -9.9°C (+14°F), HH °C(°F) will displayed if value higher than
+50°C (+122°F).
•
Outdoor temperature measuring range: -40°C (-40°F) ~ +70°C (+158°F), LL °C(°F) will
displayed if value lower than -40°C (-40°F), HH °C(°F) will displayed if value higher than
+70°C (+158°F).
°C or °F temperature display
•
The temperature is displayed either in °C or °F. Briefly pressing the “ ” button allows you to
switch between the individual modes.
Wireless sensor transmission:
•
When the main unit successfully receives signals from the Wireless Sensor, the outdoor
temperature are displayed on
the “Outdoor” column of the main unit. The outdoor sensor will
synchronize the data with the host every minute.
•
If the main unit loses the outdoor sensor signal (outdoor display --) due to external reasons,
press and hold the “▼” button for more than 3 seconds to re-search the outdoor sensor for 3
minutes. The icon
“ ” flashes to indicate that the outdoor sensor signal is being searched.
Low battery:
•
When the low voltage icon “ ” is displayed, you need to replace the clock battery.
Safety instructions
Intended use
- The radio-controlled alarm clock is intended to display the time and other data and to wake you up.
It is designed for use in private households and is not suitable for commercial purposes.