Setting the daily alarms:
•
Press and hold down “ ” button more than 3 seconds until Alarm 1 Time hour display of the
Alarm 1 time starts to flash. Use the
“▲” and “▼” buttons to set the required hour.
Note:
In the set time, you can press hold the “▲” and “▼” button to quickly change the
setting of the value (value of hour/minute/snooze time).
•
Press and release
“ ” button to confirm your setting, The Minute display of the Alarm 1 time
starts to flash. Use the
“▲” and “▼” buttons to set the required minute.
•
Press and release
“ ” button to confirm your setting, The Repeat icon “M-F” of the Alarm 1
time starts to flash. Use the
“▲” and “▼” buttons to set the alarm repeat in “M-F” or “S-S” or
“M-F” and “S-S”.
Note:
The alarm is repeatedly set to M-F, the alarm function will be activated from Monday
to Friday, the Saturday and Sunday will be invalid. The alarm is repeatedly set to S-S, and
the alarm function will be activated on Saturday and Sunday, and will expire from Monday to
Friday. When the alarm is repeatedly set to display both M-F and S-S, the alarm function will
be activated throughout the week.
•
Press and release
“ ” button to confirm your setting, the snooze time of the Alarm1 starts to
flash. Use the
“▲” and “▼” buttons to set the minute of snooze you need.
Note:
the snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze
function. Snooze time unit is minutes.
•
Press and release
“ ” button to confirm your setting, The Hour display of the Alarm 2 time
starts to flash. Use the
“▲” and “▼” buttons to set the required hour.
•
Press and release
“ ” button to confirm your setting, The Minute display of the Alarm 2 time
starts to flash. Use the
“▲” and “▼” buttons to set the required minute.
•
Press and release
“ ” button to confirm your setting, The Repeat icon “S-S” of the Alarm 2
time starts to flash. Use the
“▲” and “▼” buttons to set the alarm repeat in “M-F” or “S-S” or
“M-F” and “S-S”.
•
Press and release
“ ” button to confirm your setting, the snooze time of the Alarm2 starts to
flash. Use the
“▲” and “▼” buttons to set the minute of snooze you need.
•
Press and release
“ ” button to confirm your setting and to end the setting procedure.
Note:
After 20 seconds without pressing any button the clock switches automatically from
setting mode to Normal clock mode.
The alarm for opening and closing
•
In normal Time Mode, Press and release the “▲” button to turn the alarm on or off, Press
and hold the
“▲” button once to change the state once. There are 4 states:
Press 1x: Alarm 1 activated
Press 2x: Alarm 2 activated
Press 3x: Both alarms are activated
Press 4x: Both alarms deactivated
•
You can also p
ress “ ” button can switch the display ALARM1 time or ALARM2 time, in the
alarm1 or alarm2 display mode, Press the
“▲” button to turn individual alarms on or off.
•
The alarm 1 or alarm 2 turn on
, the “ ” or “ ”icon is displayed, the alarm 1 or alarm 2
function is open, The repeat of alarm icon at the same time is also displayed.
•
The alarm 1 or alarm 2 turn off, the
“ ” or “ ”icon disappears, the alarm 1 or alarm 2
function is close.
