Paradyne M/HDSL Standalone Termination Unit HOTWIRE..., Руководство пользователя

Страница: 24 / 122

Using the Asynchronous Terminal Interface
2-8
7986-A2-GB20-00 September 1998
Switching Between Screen Work Areas
Select Ctrl-a to switch between the two screen work areas to perform all screen
functions.
"
Procedure
To access the screen function area below the dotted line:
1. Press Ctrl-a to switch from the screen area to the screen function key area
below the dotted line.
2. Select either the function’s designated (underlined) character or press the
Tab key until you reach the desired function key.
Example:
To save the current screen, type s or S ( Save ).
3. Press Enter.
4. To return to the screen area above the dotted line, press Ctrl-a again.
Î
Î
ÎÎ
ÎÎ
main/config/network Hotwire
Model: 7986
NETWORK INTERFACE OPTIONS
Margin Threshold: –3db
Excessive Error Rate Threshold: 1E–5
AutoRate Disable
DSL Line Rate 528
Peer IP Address: 111.255.255.000 Clear
Circuit Identifier: Clear
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save