Paradyne Hotwire 8620, Руководство по установке, Страница: 36 / 58

3. Cabling
3-2
June 2004 8620-A2-GN20-50
Installing Network Tip and Ring Connections
Line cards connect to the network through connectors mounted on the back of the
8620 BAC. Each slot has its own 50-pin connector wired to it and is capable of
supporting high-density cards with up to 25 ports.
The network Tip and Ring cables must be equipped with end-fed plug connectors.
Each connector has a captive screw at one end and a tapped hole in the plastic at
the other end. The connector’s captive screw must be replaced with a shorter one
supplied with the chassis. You can attach the cable to the chassis using the cable
ties provided or you can use the locking pivot brackets provided. See
Connecting a
Line Card Using Locking Pivot Brackets on page 3-4.
EMI NOTICE:
In order to maintain compliance with Part 15, FCC Rules and other EMI
requirements, certain line cards require the installation of the supplied
ferrite choke on the 50-pin telephone network cable where it connects to
the BAC. The choke and its installation instructions are provided with the
line cards.
!