Paradyne COMSPHERE 3610, Руководство оператора

Страница: 165 / 310

Configuration Options
6-37 3610-A2-GB91-90 July 1999
Table 6-10
(1 of 4)
MCMP Setup (MUX Funct: MCMP) Configuration Options
MUX Funct: MCMP
Next TDM MCMP CBrdg EBrdg None Prev
TDM/MCMP Circuit Card Function with MCMP mode selected. Selects the MUX function or mode of
operation for the MCMP circuit card. The DSU establishes the same data paths as in TDM or MCMP mode
of operation, plus the multichannel multipoint circuitry is activated on the MCMP circuit card.
TDM — Configures for TDM mode for multiplexing or digital-sharing configuration.
MCMP — Configures for MCMP mode for multichannel multipoint operation and digital-sharing
configuration.
CBrdg — Configures for Bridge mode for a central-site bridge configuration.
EBrdg — Configures for Bridge mode for a extended bridge configuration.
None — Configures for Basic mode, which bypasses the MCMP circuit card.
Share DevA: Disab
Next Enab Disab Prev
Sharing Device A.
1, 2
Enabling this configuration option allows you to create one of two contention or
digital-sharing groups for TDM backup of MCMP. The following rules apply:
•
All ports in a group must have the same port speed.
•
All ports must be adjacent.
•
A contention group can have from 2 to 6 ports (only 2 ports when a 2-port MCMP/Flex is installed).
•
All ports must be assigned to the same channel.
Enab — Enables the digital-sharing feature.
Disab — Disables the digital-sharing feature.
Lowest Port#: 1
Next 1 2 3 4 5 Prev
Lowest Port Number.
1
Allows selection of the lowest port number to be included in the digital-sharing group.
This configuration option is displayed only if Sharing Device A is enabled and a 6-port MCMP is installed.
1 to 5 — Selects the lowest port number. This configuration option does not appear when a 2-port
TDM/Flex is installed.
1
For MCMP, a digital-sharing group is set up by assigning multiple ports to the same channel. If DSD
contention is required, these sharing device configuration options must also be used. Only two
digital-sharing groups may have DSD contention; all other groups are defaulted to Host contention.
2
For an LPDA-2 configuration, only Sharing Device A can be used to create a digital-sharing group.