Paradyne 12000, Руководство по интерфейсу командной строки

Страница: 38 / 42

3. CLI Commands
3-22
October 2004 CLI-A2-GB20-00
Enable TFTP (Default)
Enables Trivial File Transfer Protocol (TFTP), allowing both system and port
configurations to be saved on your PC or local network as a backup and/or for use
as a template for future condfigurations (Section 1.4.2). TFTP also enables
download of firmware upgrades to your DSLAM (see the firmware upgrade
procedure for your device).
Enable Web Server (Default)
Allows DSLAM management via Paradyne’s Network Management System
(NMS). See the NMS Management User Guide.
Help
The HELP command returns a list of CLI command possibilities.
A response to either of the above HELP Commands might appear as follows:
[system name] ->enable_tftp
[system name] ->enable_web_server
[system name] ->help
OR
[system name] ->?
Usage: [?, CLEAR_NVRAM, HELP, LOGOUT, WHO]
[DISABLE_TELNET, DISABLE_TFTP, DISABLE_WEB_SERVER]
[ENABLE_TELNET, ENABLE_TFTP, ENABLE_WEB_SERVER]
allow [ALL, IP_ADDRESS [IPADDRESS]]
[SET, SHOW] [CLI_SESSION_TIMEOUT, SYSTEM_NAME]
[SET, SHOW] SLOT [ALL, slotnumber] [PORT] [ALL, portnumber] ITEM VALUE
Slot is MANDATORY for all SET/SHOW commands
ITEMS VALUES
------------------------------------ --------------------------------------
ALLOW Allow IP_Address [IP_ADDRESS] (for mgmt)
BACKBONE_VLAN [0-4085]
CLEAR_NVRAM Reboots the unit and restores factory defaults
CLI_SESSION_TIMEOUT Changes the CLI Session Inactivity Timeout
DEFAULT_GATEWAY xxx.xxx.xxx.xxx
DISABLE_TELNET Disables TELNET Capabilities
DISABLE_TFTP Disables TFTP Server
DISABLE_WEB_SERVER Disables the web server interface (NMS)
ENABLE_TELNET Enables TELNET Capabilities