Paradyne 12000, Руководство по интерфейсу командной строки

Страница: 31 / 42

3. CLI Commands
CLI-A2-GB20-00 October 2004
3-15
VPI
Valid values for VPI are in the range 0–255.
Default: 0
VCI
Valid values for VCI are in the range 0–65535.
Default: 35
VPI/VCI Detect
VPI/VCI detection is a selectable function.
On
A port with VPI/VCI Detect on will automatically "snoop" the line to determine the
VPI and VCI settings of the remote ADSL modem to which it is connected and set
itself accordingly. If no ATM cells are detected (at any VPI/VCI setting), the port will
default to VPI 0 and VCI 35. Thereafter, once it does detect ATM cells from the
remote ADSL modem, it will reconfigure VPI and VCI to the same settings at which
the ATM cells from the remote ADSL modem were detected.
Off
A port with VPI/VCI Detect off will default to VPI 0 and VCI 35 unless the port was
previously set at VPI/VCI Detect on and had already detected the VPI and VCI
settings of the remote ADSL modem. In this case, turning the VPI/VCI Detect
function off will lock in the previously detected settings until, or unless, the VPI and
VCI values are altered manually.
Default: On
[system name] ->SET SLOT [ALL or 1-12 for the IPD12000, ALL or 1-4
for the IPD4000, 1 for the Micro DSLAM] PORT [ALL or port number]
ADSL_VPI [value]
Example: [system name] ->set slot 2 port all adsl_vpi 0
[system name] ->SET SLOT [ALL or 1-12 for the IPD12000, ALL or 1-4
for the IPD4000, 1 for the Micro DSLAM] PORT [ALL or port number]
ADSL_VPI [value]
Example: [system name] ->set slot 2 port all adsl_vci 37
[system name] ->SET SLOT [ALL or 1-12 for the IPD12000, ALL or 1-4
for the IPD4000, 1 for the Micro DSLAM] PORT [ALL or port number]
ADSL_VPI_VCI_DETECT [value]
Example: [system name] ->set slot 2 port all adsl_vpi_vci_detect off