Paradyne 12000, Руководство по интерфейсу командной строки

Страница: 12 / 42

1. CLI Overview
1-4
October 2004 CLI-A2-GB20-00
IP DSLAM Data Management
Replacing an Interface Module
A replacement module (of like model) will take on the same configurations as the
previous module only if the Multiplexer Uplink Module (MUM) remains in the
chassis and the chassis retains power during the interim. Otherwise replacement
module configurations will revert to original default settings.
Replacing a Multiplexer Uplink Module (MUM)
Paradyne recommends clearing the NVRAM of a previously configured MUM
before using it as a replacement in a different chassis. Once NVRAM has been
cleared, the MUM will revert to original default settings.
A replacement MUM will take on the same configurations as the previous MUM
only if there is at least one interface module installed in the IP DSLAM and the IP
DSLAM retains power during the interim. Otherwise, the replacement MUM will
revert to original default settings.
If the replacement interface module is: Then the module configuration will revert to:
The same model as the previous module and new or
unconfigured The same configurations as the previous module
The same model as the previous module and already
configured The same configurations as the previous module
A different model than the previous module and new or
unconfigured Original default settings (see Default Settings on
page 1-2)
A different model than the previous module and already
configured Original default settings (see Default Settings on
page 1-2)
If the replacement MUM is:
Then chassis and interface module configurations
will revert to:
The same model as the previous MUM and new or
unconfigured The same configurations as the previous MUM
A different model than the previous MUM and new or
unconfigured The same configurations as the previous MUM