Paradyne 12000, Руководство по интерфейсу командной строки

Страница: 23 / 42

3. CLI Commands
CLI-A2-GB20-00 October 2004
3-7
SNMP Community String
SNMP community strings may be up to 15 case-sensitive alphanumeric
characters. You will be prompted for values. Only one SNMP community string
may be assigned per each class of user: all read only users utilize the same
community string and all read/write users utilize the same community string.
Read-only and read/write SNMP community strings cannot be configured remotely
via Telnet.
Read Only
Read only users are limited to SNMP GET requests.
Default: Password
Read / Write
Read/Write users have unlimited access to all supported SNMP Managment
Information Base (MIB) Object Identifiers (OIDs).
Default: Password
System Name
System Name is a user-defined identifier of up to 32 alphanumeric characters. It
replaces model name as the CLI command prompt.
Default: BSX, MUM, or Micro DSLAM model name
[system name] ->SET SLOT [13 or 14 for the IPD12000, 5 for the
IPD4000, 1 for the Micro DSLAM] SNMP_READONLY_COMMUNITY
Example: [system name] ->set snmp_readonly_community
Community: ********
Verify: ********
[system name] ->SET SLOT [13 or 14 for the IPD12000, 5 for the
IPD4000, 1 for the Micro DSLAM] SNMP_READWRITE_COMMUNITY
Example: [system name] ->set snmp_readwrite_community
Community: ********
Verify: ********
[system name] ->SET SYSTEM_NAME [user defined]
Example: [system name] ->set system_name
dslam412_mum13
The command prompt would then appear as:
dslam412_mum13 ->