54
Reference & Installation Manual
When armed, the PGM will pulse once every 30 seconds.
Option
[6]
OFF
= PGM Pulse on any alarm disabled (default)
Option
[6]
ON
= PGM Pulse on any alarm enabled
This option sets the PGMs to pulse on any alarm.
Option
[7]
OFF
= PGM Pulse on any alarm Partition 1(default)
Option
[7]
ON
= PGM Pulse on any alarm Partition 2
Program PGMs to pulse during an alarm for either partition. With this feature enabled, and in combination with the Follow Arm/
Stay Arm/Sleep Arm PGM type, the PGM will mimic the Arm LED.
13.5
PGM Programming
Sections
[301]
to
[316]
The programming of the PGMs is accomplished in two steps:
1. Assign the PGMs to the panel.
2. Program the PGMs.
PGM Programming can be executed through the Installer Quick Menu in the
programming guide
.
13.6
Viewing the PGM Signal Strength
Sections
[321]
to
[336]
Once PGMs have been installed and assigned to the panel, the signal strength of each PGM can be verified in sections
[321]
to
[336]
. Sometimes moving the PGM or control panel by a small amount will greatly increase the signal reception.
How Do I Assign PGMs to the Panel?
1) Press the
[
ENTER
]
key.
2) Enter your
[
INSTALLER
CODE
]
(default: 0000 / 000000) or
[
MAINTENANCE
CODE
]
(empty by default)
3) Enter the desired
[
SECTION
NUMBER
]
(from sections
[301]
to
[316]
).
4) Enter the 6-digit
[
SERIAL
NUMBER
]
of the PGM.
How Do I Delete Assigned PGMs?
1) Press the
[
ENTER
]
key.
2) Enter your
[
INSTALLER
CODE
]
(default: 0000 / 000000) or
[
MAINTENANCE
CODE
]
(default 1111/111111)
3) Enter the desired
[
SECTION
NUMBER
]
(from sections
[301]
to
[316]
).
4) Press the
[0]
key six times to clear the serial number.
How Do I View a Wireless Transmitter’s Signal Strength?
1) Press the
[
ENTER
]
key.
2) Enter your
[
INSTALLER
CODE
]
(default: 0000 / 000000) or
[
MAINTENANCE
CODE
]
(empty by default)
3) Enter the desired
[
SECTION
NUMBER
]
(from sections
[321]
to
[336]
).
4) Press the transmitter’s anti-tamper switch or open the corresponding zone.
5) The keypad will illuminate numbers 1 to 10.
Signal Strength Indicator
8 to 10 / 3 beeps = Best signal
5 to 7 / 2 beeps = Average signal 1 to 4 / 1 beep = Weak signal (Relocate)
