IM728-738
12
Panel Answer Options:
(Address 000)
DIRECT ADDRESS
The first digit entered disables the “Answering Machine Override” (key [2
ND
] or key [1]), or determines
the period of time between first and second call.
The second digit entered determines the number of rings required before the panel will answer. If
[2
ND
][2
ND
] is entered, the panel will not answer. (Default value is [2
ND
] [8].)
Panel Identifier:
(Addresses 001, 002)
DIRECT ADDRESS
This four digit code identifies the control panel to the PC before uploading can be initiated. Each pair of
code digits has its own memory address. There is no default code. Any hexa digits from 00 - FF can be
entered. Program first 2 digits in address 001 and second 2 digits in 002.
Related features:
"Panel Answer Options" 000
"Call back" 206, [4]
PC Password:
(Addresses 003, 004)
DIRECT ADDRESS
This four digit download password identifies the PC to the panel, prior to beginning the programming
download process. Program the first 2 digits in address 003 and the second 2 digits in 004.
Installer Code:
(Addresses 005, 006, 007)
DIRECT ADDRESS
(Use only numeric keys from [1] to [10] to enter installer code. Key [10] = 0.)
The default installer code contains 6 digits. Default code for the 728 is 282828, and for the 738 is
383838. (Codes can also be programmed to contain 4 digits, address 208, [9] "on".) Create a new
installer code by entering the values of 1st and 2nd digit at address 005, 3rd and 4th digit at address 006,
and 5th and 6th digit at address 007.
The installer code has access to all programming addresses, except 008-058. It does not provide access
to arming/disarming or user code programming. It can be used to modify itself.
Related features:
"Installer lock" 255
"User/access code length" 208, [9]
Intelli zone
Delay:
(Address 059)
DIRECT ADDRESS
The first digit determines the period of time in which two intellizone detections must take place, or in
which an intellizone must remain open, in order for an alarm to be communicated.
First digit: (factory default [3])
[1] = 16 sec.
[5] = 80 sec.
[9] = 144 sec.
[
BYP
] = 208 sec.
[2] = 32 sec.
[6] = 96 sec.
[10] = 160 sec.
[
MEM
] = 224 sec.
[3] = 48 sec.
[7] = 112 sec.
[11] = 176 sec.
[
TRBL
] = 240 sec.
[4] = 64 sec.
[8] = 128 sec.
[12] = 192 sec.
[2
ND
] = 256 sec.
Streamlined Section Programming:
To begin programming:
Press [
ENTER
] + installer code + [2] [7]. ([
ENTER
] and [2
ND
] keys will flash.)
Enter 2 digit section for programming (00 - 34). ([
ENTER
] key is "steady" and [2
ND
] key is "off".)
Enter 8 digits to program the section. Keypad will beep, to show section has been programmed.
Data is saved and the next section is advanced to automatically for programming.
To select a specific section, press [
CLEAR
] or [
ENTER
]. ([
ENTER
] and [2
ND
] keys will flash.)
Enter 2 digit section (00-34). ([
ENTER
] key is "steady" and [2
ND
] key is "off".)
To exit programming mode, press [
CLEAR
].
