manualshive.com logo in svg

Paradox Digiplex Liberator DGP-319, Руководство по установке

Поделиться
Скачать
Paradox Digiplex Liberator DGP-319 Скачать руководство пользователя страница 8

Digiplex Liberator 9

3.1.1 Feature Select Programming

Feature Select Programming is accomplished by enabling and/or disabling
options. Feature Select Programming is used to program sections 

[001] 

and

 [002]

and is also used in 

PGM Programming

. Within the sections, numbers from 1 to 8

represent a specific option to enable or disable. Press the key corresponding to
the desired option and the digit should appear on the LCD screen or illuminate the
corresponding LED on the LED Keypad. This means that the option is enabled or
ON. For example, in Step 6 of Figure 3-1, options [1] and [4] are enabled and
show on the LCD screen. The 1 and 4 LEDs would illuminate on the LED Keypad.
Press the key again to remove or extiguish the digit, thereby disabling (turning
OFF) the option.

3.2 L

OW

 B

ATTERY

 S

UPERVISION

SECTION

 [001]: 

OPTION

 [1]

The wireless detectors and contact switches function on two 3.6V Lithium batteries.
When a detector or contact switch detects a battery voltage of 6.5V or less, its
yellow light (LED) will flash and it will transmit a signal to the Liberator Wireless Bus
Module indicating that the voltage is low. If this option is enabled, the Receiver
Module will transmit a signal to the control panel, which it will recognize as a Zone
Low Battery.  If this option is disabled, the Receiver Module will not transmit the low
voltage signal to the control panel.  

From Step 6 in Figure 3-1, page 8, enable or disable the option:

Option 

[1] 

OFF = Low Battery Supervision disabled

Option 

[1]

 ON  = Low Battery Supervision enabled (default)

I319EI01.fm  Page 9  Wednesday, September 29, 1999  10:56 AM

Содержание Digiplex Liberator DGP-319






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды