Paradox Digiplex Liberator DGP-319, Руководство по установке

Страница: 11 / 37

12 Installer’s Guide
3.7 PGM T
IMERS
SECTIONS
[003]
AND
[004]
When PGM(s) are in Timed Mode , the value programmed for PGM 1 in section [003]
and for PGM 2 in section [004] are multiplied by the PGM Base Time . This value can
be any decimal from 001 to 255. This defines the time period the PGM(s) will remain
activated unless the
PGM Override is enabled. (Default 005)
From Step 5 in Figure 3-1, page 8:
3.8 PGM A
CTIVATION
E
VENT
SECTIONS
[005]
AND
[007]
The PGM Activation Events determine which events will activate the Liberator
Wireless Bus Module's one or two on-board PGMs. If other PGM(s) on other
modules or the control panel are programmed with the same PGM Activation Event
as the Receiver Module, those PGM(s) will also be activated when the event occurs.
For details on the available activation events, refer to the
PGM Programming Table
(see section 7.0 of this manual).
Both the PGM Activation Event and PGM Deactivation Event must be
programmed for the PGM(s) in Follow Mode to function properly.
From Step 5 in Figure 3-1, page 8:
PGM 1: enter section [005]
PGM 2: enter section [007]
Timer PGM 1: Timer PGM 2:
1) Enter section [003] 1) Enter section [004]
2) Enter value (001 to 255) 2) Enter value (001 to 255)
I319EI01.fm Page 12 Wednesday, September 29, 1999 10:56 AM