Paradox Digiplex Liberator DGP-319, Руководство по установке

Страница: 22 / 37

Digiplex Liberator 23
These keys represent the hexadecimal values from A to F:
[STAY]
= A [DISARM] = D
[FORCE] = B [BYP] = E
[ARM] = C [MEM] = F
For installations using the LED Keypads, the hexadecimal values will
illuminate the following LEDs:
(A) = [
STAY
] LED (D) = [A4] LED
(B) = [
FORCE
] LED (E) = [
BYP
] LED
(C) = [A1] LED (F) = [
MEM
] LED
For explanations concerning the function of each of the Button choices, refer to their
respective sections in the
Digiplex Control Panel's Reference & Installation Manual .
For installations using LCD Keypads:
From Step 5 in Figure 3-1, page 8:
1) Enter a section from
[501] to [516] depending on the remote control you want to
program. For example, program the buttons for the remote control assigned in
section
[301] in section [501] .
2) Place the underline under the digit of the button or button combination you want to
program (Figure 5-2). Enter a hexadecimal value (0 to F) of the option you want
from Table A page 22.
3) Return to Step 2 for each button or button combination for the remote control.
4) Press
[
ENTER
] once the remote control is programmed. The LCD screen will
automatically switch to the next section for the next remote control.
For example: You have programmed section [501] for the remote control
assigned in section [301] . Press [
ENTER
] . Section [502] will appear on the screen
for you to program the remote control that is assigned in [302] .
I319EI01.fm Page 23 Wednesday, September 29, 1999 10:56 AM