27
NOTE 1: 000 = Occurs in all areas enabled in the system (refer to the appropriate control panel Programming Guide).
001 = Area 1 003 = Area 3 005 = Area 5 (EVO96/EVO192/DGP-NE96 only) 007 = Area 7 (EVO96/EVO192/DGP-NE96 only)
002 = Area 2 004 = Area 4 006 = Area 6 (EVO96/EVO192/DGP-NE96 only) 008 = Area 8 (EVO96/EVO192/DGP-NE96 only)
255 = Occurs in at least one area enabled in the system.
NOTE 2:This TLM trouble event can only be used with DGP-NE96 control panels that have two dialers.
NOTE 3:This TLM trouble event can only be used with control panels that have one dialer.
NOTE 4:This event cannot be used for a module’s PGM programming.
*
:If a Keyswitch Input is used, the input must be defined as “Generates a Utility Key Event on Open” or “Generates a Utility Key Event on
Open and Close”. If a remote control is used, the remote control button must be defined as a Utility Key button.
†
:Actions that Activate a Utility Key Event:
066
Status 3
See
Note 1
on page 27
Intellizone Delay Engaged (see
Note 4 on page 27)
000
000
Fire Delay Engaged
001
001
Auto Arm
002
002
Arming with Voice Module (set
until Exit Delay finishes)
003
003
Tamper
004
004
Zone Low Battery
005
005
Fire Loop Trouble
006
006
Zone Supervision Trouble
007
007
067
Future Use
Future Use
Future Use
Future Use
Future Use
Event
Group
Event
Feature Group
Feature
Start #
End #
