Paradox Digiplex EVO DGP2-640, Справочное и монтажное руководство

Страница: 11 / 24

DGP2-640 Icon LCD Keypad 7
4.0 System Options
The system communicates with the user by illuminating icons in the
LCD display as shown in Figure 2.
4.1 Partition Display
)
Sections [001] to [008]
You can program the DGP2-640 to
display up to four partitions. Sections
[001] to [004] correspond to partitions
1 to 4 (see Figure 2.
The LCD numbers 1 to 4 are assigned values 001 to 004. To assign
an LCD display number to a partition, choose a section number from
[001] to [008] and assign it a value between 001 and 004 which
represents LCD numbers 1 to 4 respectively.
Do not assign the same display number to more than one
section. For example, you cannot assign value 002 to sections
[003] and [004] . The rejection beep will remind you that a
selected display number is already assigned to another
section. Refer to
List of Sections on page 14 for default values.
Example :
LCD number 3 is assigned to partition 3. To reassign LCD number 3
to partition 8 perform the following steps:
1. Enter 003 to select partition 3.
2. Enter 000 to clear the value.
3. Press the key.
4. Enter 008 to select partition 8.
5. Enter value 003 to reassign LCD number 3 to partition 8.
6. Press the key to exit.
004
003
002
001
Figure 2: Partition Display
DGP2640_EI00.fm Page 7 Thursday, April 7, 2005 12:05 PM