Paradox DIGIPLEX DGP-NE96, Справочное и монтажное руководство

Страница: 14 / 20

10 Reference & Installation Manual
4
Zone Programming
All detection devices connected to the control panel, keypads and zone expansion modules must be assigned to a zone and that zone must be defined as
described in this section.
Figure 13: Zone Programming
4.1 Zone Numbering
S
ECTIONS
[0001]
TO
[0096]
The Zone Numbering feature is used to individually assign each detection
device to any zone in the DGP-NE96 system (see Figure 13). The Zone
Parameters define the type of zone, the zone's partition assignment and
how the control panel will react when an alarm occurs on that zone (see
section 4.3 to section 4.5 on pages 11 to 13).
• To assign an addressable PIR or door contact to the combus, program
the module’s serial number into the section corresponding to the desired
zone (i.e. program zone 34 in section [0034]).
• To assign a detection device connected to a module or control panel's
hardwired input terminal, program the module's or control panel's serial
number and the input number where the device is connected into the
section corresponding to the desired zone. See the
Module
Programming Guide for details of its input numbers (input numbers not
required for keypad zones).
If PGM1 is defined as a smoke detector input (see section 10.6
on page 29), the control panel will recognize it as input # 255.
Figure 14: Zone Numbering
Press & hold the
[0] key
Key in the
[
INSTALLER CODE
]
Key in 4-digit
[
SECTION
]
Enter the 8-digit
[
SERIAL NUMBER
] of the
addressable detection device or
module that has a hardwire
device connected to it.
Enter the module’s 3-digit
[
INPUT NUMBER
] where the
hardwire device is connected.
NOTE: For addressable PIRs, door
contacts and keypads, no input # is
required
Zone Definition
First Digit
Zone Partition
Assignment
Second Digit
Zone Options
Feature Select
Press [
ENTER
]
Zone Options
[1] Auto Zone Shutdown
[2] Bypass Zone (Default)
[3] Stay Zone
[4] Force Zone
[5]
[6] Zone Alarm Type
off off Alarm (steady)
off on Audible Alarm (pulsed)
on off Silent Alarm
on on Generates only a report
[7] Intellizone
[8] Delay before transmission
Zone Partition Assignment
1- Zone Assigned to Partition 1 (Default)
2- Zone Assigned to Partition 2
3- Zone Assigned to Partition 3
4- Zone Assigned to Partition 4
5- Zone Assigned to Partition 5
6- Zone Assigned to Partition 6
7- Zone Assigned to Partition 7
8- Zone Assigned to Partition 8
Zone Definitions
0- Disabled (Default) 8- 24Hr Gas
1- Entry Delay 1 9- 24Hr Heat
2- Entry Delay 2 A- 24Hr Water
3- Follow B- 24Hr Freeze
4- Instant C- Delayed 24Hr Fire
5- 24Hr Buzzer D- Standard 24Hr Fire
6- 24Hr Burglary E- Stay Delay 1
7- 24Hr Hold-up F- Stay Delay 2
Zone Numbering
Sections [0001] to [0096] represent
zones 1 to 96 respectively
Zone Parameters
Sections [0101] to [0196] represent
zones 1 to 96 respectively
Select one
only
Select one
or more
Select one
only
Input
2
Hardwired
Device B
Control Panel
SN#:020000A2
APR3-ZX8 Module
SN#: 34000041
Input 5
Detector A
SN#: 21000033
C
OMMUNICATION
N
ETWORK
Input Terminals
1 2 3 4 5 6 7 8
Detector A:
Hardwired Device A:
Hardwired Device B:
Hardwired Device C:
Zone#
1 =
2 =
3 =
4 =
Section#
[0001]
[0002]
[0003]
[0004]
Serial#
21000033
1A000252
020000A2
34000041
Input#
N/A
N/A
002
005
Keypad
SN#: 1A000252
Keypad Zone
Hardwired
Device C
Hardwired
Device A
Input Terminals
1 2 3 4 5 6 7 8
Combus