Digiplex LCD Keypad 21
n
the same manner as the
PGM Activation Event
.
5.5 PGM T
IMED
M
ODE
Section 005: Option [2]
If the keypad is in PGM Timed Mode, the keypad's on-board
PGM will be deactivated according to the
PGM Timer
(see
section 5.6 below) instead of the
PGM Deactivation Event
.
Option
[2]
OFF= Deactivates on PGM Deactivation Event (default)
Option
[2]
ON = PGM will deactivate according to the PGM Timer
5.6 PGM T
IMER
Section 007
If the keypad's on-board PGM is in
PGM Timed Mode
, the value
programmed in section
[007]
represents how long the PGM will
remain in its opposite state (see section 5.2 on page 19) after
being activated. To program the timer, enter a 3-digit decimal
value (000 to 255) in section
[007]
. The 3-digit value will be
multiplied by the
PGM Base Time
of 1 second or 1 minute (see
section 5.7 below).
5.7 PGM B
ASE
T
IME
Section 005: Option [3]
If the keypad's on-board PGM is set in
PGM Timed Mode
(see
section 5.5 above) you must define whether the value
programmed in section
[007]
is in minutes or seconds.
Option
[3]
OFF= PGM Base Time is 1 second (default)
Содержание Digiplex DGP-641
