OPERATING INSTRUCTIONS
Time Mode (Time):
Press the Mode button to select Time Mode (Time) when
“Time” LED lights up. The LED display will show the time that can be set.
You may press the “▲” or “▼” button to set the time. Each time you press
the “▲” or “▼” button, the time will increase or decrease by 1 Hr. If no
buttons are pressed for 3 seconds, it will switch to the current ambient
temperature. When pre-set time counts down to 0. The heater will off
automatically.
Sleep Mode (Sleep):
Press the Mode button to select Sleep Mode (Sleep)
when “Sleep” LED lights up. The LED display will show the default value of
▲” or
“▼” button. If no buttons are pressed for 3 seconds, it will switch to the
current ambient temperature.
High Temperature Level Mode (II):
Press the Mode button to select High
Temperature Level Mode (II) when “II” LED lights up. The LED display will
“▲” or “▼” button to set the temperature. If no buttons are pressed for 3
seconds, it will switch to the current ambient temperature. Once you have set
the desired temperature, the heater will remain on until the ambient
temperature increases to the temperature that you set. The heater will off
automatically to maintain the desired ambient temperature. (Note: If the
current ambient temperature is greater than the set temperature, the function
will not operate.)
Error codes on LED display:
E1:
Temperature sensor is on short-circuit.
E2:
Temperature sensor is on open-circuit.
E3:
Remote Control Button Instructions:
Power:
Press Power button to turn on or off the
power of the heater.
Time increase and decrease:
Used for setting
time.
TEMP increase and decrease:
Used for setting
temperature.
High:
Displays High Temperature Level Mode
(II).
Low:
Displays
Low Temperature Level Mode (I).
Sleep:
Displays Sleep Mode (Sleep).
Button for alternating between Fahrenheit
and Celsius.
80 °F (27 °C)
130 °F
°F / °C
77 °F
8
