OPERATING INSTRUCTIONS
7
A: Control button layout
B: Temperature setting:
C: Time Setting:
0~ 8 hours
D: Operation:
Plug the power cord into an appropriate socket or outlet. Then press the
Master Power Switch to “ON” position on the rear of the heater and the
Power LED will light up on the control panel.
“Power (ON/OFF)” Button:
Power ON:
Press and hold the Power (ON/OFF) button for 2-3 second to
turn on the power of the heater. The heater works on default setting of the
high temperature level performance.
Power OFF:
Press the Power (ON/OFF) button to turn off the power of the
heater. All LED lights are off except the Power LED light. Then turn off the
master power switch on the rear of the heater.
“Mode” Button:
Press the Mode button to select Low Temperature Level Mode (I), Time Mode
(Time), Sleep Mode (Sleep), or High Temperature Level Mode (II).
Low Temperature Level Mode (I):
Press the Mode button to select Low
Temperature Level Mode (I) when “I” LED lights up. The LED display will
“▲” or “▼” button to set the temperature. If no buttons are pressed for 3
seconds, it will switch to the current ambient temperature. Once you have set
the desired temperature, the heater will remain on until the ambient
temperature increases to the temperature that you set. The heater will off
automatically to maintain the desired ambient temperature. (Note: If the
current ambient temperature is greater than the set temperature, the function
will not operate.)
39 - 80 °F (4 - 27 °C)
show the default value of temperature as 80 °F (27 °C). You may press the
