Cleaning the Air Filter
The heater comes equipped with a washable air filter. It is easy to be cleaned.
We recommend the air filter to be cleaned once a month or if it appears to be
blocking airflow. To do this, please follow the below steps.
1. Loosen the bolt and remove it.
2. Gently remove the air filter from the rear of the
heater.
3. Clean the filter by running clean water on the opposite direction of the air
filter. You can also soak the air filter in water mixed with a small amount
of mild dish soap. Then rinse with water after soaking.
4. Please allow it to drip dry completely before reinstalling.
5. Do not use heater with without air filter assembly in place.
Storage
Store the heater in a clean and dry location when not in use.
MAINTENANCE
9
1. Press the Power (ON/OFF) button on the control panel to turn off the
power of the heater.
2. Turn off the master power switch on the rear of the heater.
3. Unplug the unit and wait until it is completely cool before clean.
4. To clean the heater, the outer surfaces of the heater may be cleaned with
a soft, damp cloth and any mild detergent if necessary. After cleaning,
dry the heater with a soft cloth.
CAUTION: Do not let liquid enter the heater.
5. Do not use abrasives or solvents to clean the heater. This may cause
damage to the surface of the heater.
6. Do not drop the heater in water.
7. Wait until the heater is completely dry before use.
