SNMP-NET
7
8. Click on the Configuration button and setup the essential network parameters. (See 2-3)
Figure 2-3
Configure the system parameters.
Configuring the SNMP-NET through the COM Port
1. Prepare a workstation (Microsoft Windows 9x, Me, NT4.0, 2000, 2003, XP or later).
2. Use the RJ45 to DB9 serial cable (provided) to connect between the SNMP-NET Console
port and the COM port on the workstation.
3. Set both the DIP-switches of the SNMP-NET to OFF position (normal mode).
4. From the workstation running Microsoft Windows (9x, Me, NT4.0, 2000, 2003, XP or later),
click on the HyperTerminal icon of the accessory programs group.
5. Enter a name and choose an icon for the connection.
6.
Select direct COM port connection.
7. Setup the COM port parameters - 2400 bps, 8 data bits, no parity, 1 stop bit and no flow
control.
8. Set both the DIP-switches of the SNMP-NET to
ON
position (configuration mode).
Messages will be displayed on the screen. Key in the administrator account (default
account is
admin
) and password (default password is
password
). The SNMP-NET
configuration utility main menu will be displayed on the screen. Please refer to the Text
Mode Configuration section for more information.
