PARA Dox CR-R880-BL, Руководство по установке

Страница: 8 / 20

6 Installation Manual
2. Maintain all reader wiring a minimum of 30 cm(12")
away from other wiring such as: AC power, computer
data wiring, telephone wiring, wiring to electric lock
devices, etc.
3. Avoid installing within 1.1m (3.5 feet) of computer
monitors or CRTs. The minimum distance will vary
depending on the type of monitor or CRT.
4. Avoid installing in proximity to sources of broad
spectrum EMI noise such as: motors, pumps,
generators, DC to AC converters, uninterruptible
power supplies, AC switching relays, light dimmers,
computer monitors and CRTs.
5. Avoid installing in proximity to potential sources of RF
signal transmitters such as: cellular telephones, two
way radios, etc.
Mounting
After selecting the appropriate mounting position for the
reader, use the reader's mounting-plate (refer to
page 12) as a guide and drill two mounting holes and a
3/8" to 1" hole for the reader cable. If you wish to mount
the CR-R880-BL on a gang box, a single gang box
mounting plate (CR-MTPLATE) is available as an option
(refer to page 13). Place a grommet around the edge of
the hole for the reader cable. At the reader end, prepare
the cable by cutting the cable jacket back 1-¼" and
stripping the wires ¼". After wiring the cables as
described below, screw the mounting plate onto the
selected installation site, snap the reader onto the
mounting plate and affix with a screw as shown on
page 12.