background image

4 Installation Manual

*The specified read range assumes no electrical 
interference and that the card is presented parallel to 
the reader, with the reader installed and operated as 
outlined in this manual. The read range will vary 
depending on the type of card used. The larger the 
card, the greater the read range. The read range may 
decrease if reader is mounted on metal.

All specifications are subject to change without 
notice.

Features

Tricolour LED Display

The CR-R880-BL reader includes a tricolour LED display 
(red, green and amber) used to indicate the reader's 
status. When the orange wire is pulled low, the red LED 
will illuminate. When the yellow wire is pulled low, the 
green LED will illuminate. When the yellow and orange 
wires are pulled low (oscillation at 1KHz is required), both 
LEDs will illuminate producing an amber colour.

Face Light

The CR-R880-BL’s elegant blue face light remains 
illuminated at all times so that it can be easily located in 
the dark.

Dimensions:

5.75" H x 2" W x 1" T

Gang Box Mounting Plate:

Single (available as an option)

Approvals:

Compliant to all EU and EFTA 
countries except Greece according 
to RTT&E directives.

Содержание CR-R880-BL





















Отзывы: