6–10
M1 Paper feed failure
Possible cause
Solution
There is no electromagnet signal.
Check the electromagnet signal input to ensure that
the electromagnet signal line is normal.
The pickup roller is dirty.
Clean or replace the pickup roller.
Pickup roller wears down.
Replace the pickup roller.
M2 Continuous paper feed
Possible cause
Solution
Electromagnet signal error.
Check the electromagnet signal input to ensure that
the electromagnet signal line is normal.
The electromagnet spring hook
is not powerful enough.
Replace the electromagnet.
Incorrect assembly phase of the
clutch single set assembly.
Check the clutch single set to ensure that the
assembly phase is right.
M3 Tilt Feeding
Possible cause
Solution
The feeder channel is dirty.
Check the feeder channel to ensure that the channel
is clear.
The pickup roller is dirty.
Clean the pickup roller.
M4 Resend
Possible cause
Solution
Paper is placed incorrectly.
Confirm that the paper is placed correctly.
The separator is contaminated or
worn.
Clean or replace the separator.
Содержание P2200 Series
Страница 1: ...Maintenance Monochrome Laser Printer P2200 P2500 Series Manual...
Страница 12: ...1 3 1 1 2 Rear View 1 Network Interface 2 USB Interface 3 Power Switch 4 Power Interface...
Страница 42: ...2 21 Demo Page...
Страница 90: ...6 6 6 4 2 Inside Jam 1 Open the upper cover 2 Remove the cartridge along the guides...
