background image

2

art.nr

.8822165, Rev

. 2022-04 Publ. 2022-04-1

1

Panthera 

AB reserves the right to make technical changes if required

INTRODUCTION

Congratulations on choosing a wheelchair from Panthera AB. We hope you will be satis-

fied with your Panthera Micro 3 and wish you many happy years together. All of Panthera 

AB’s products are designed and assembled in Spånga, outside Stockholm. Our models 

are constructed to be the very best on the market with regard to quality, manoeuvrability 

and low weight.

Please ensure you carefully read the instructions.

To view the images and text more clearly, you can also read the instructions digitally at 

www.panthera.se

INTENDED USE

  

  

Panthera Micro 3 wheelchairs are built for children, between 1-5 years, who need a ma

-

nual dynamic wheelchair for everyday use, indoor use and outdoor use on flat surfaces 

under adult supervision. These wheelchairs are made to be used by children with physical 

disabilities and are not limited to specific diagnosis. Each person’s individual function 

capacity and limitations indicates whether a manual dynamic wheelchair is suitable as a 

mobility aid. Wheelchair model recommendations should be given by trained healthcare 

professionals, and the appropriate product should then be tested and adjusted by an ex-

pert for the optimal sitting and driving characteristics. The wheelchair’s design and settings 

are tested for each individual.

  

Intended use is together with a seat cushion to distribute pressure evenly over the seat.

Changing the cushion can change the user’s stability. If the height of the cushion changes, 

the settings of the wheelchair need to be reviewed by qualified personnel to ensure that 

the settings are correct.

Seat cushions with CE-marking are approved for use in the product.

Micro 3

CONTENTS

PAGE

Introduction/ Intended use

2

Design/Contact/Symbols 

3

Description/Overview

4

 

Safety regulations

5 - 8

Transfer/Lifting

7

Settings

8 -15

Accessories

15

Maintenance/Service/Repair

16 - 18

Guarantee/Conformity

19

Technical facts

20-21

Содержание MICRO 3























Отзывы: