12
art.nr
.8822165, Rev
. 2022-04 Publ. 2022-04-1
1
Panthera
AB reserves the right to make technical changes if required
SETTINGS
Footplate mounted extra low (”Low position lower”)
Fig. 18
This stage presumes that the attachment is already is mounted in ”low position”,
ie the attachment is pointing downwards
Fig. 19
1. Loosen the screw (1)
Fig. 11
completely from the nut (2), on both sides, with
allen key 4 mm.
2. Move the nut (2)
Fig. 11
to the upper hole of the footplate
Fig. 20
and mount
the footplate to the attachment with the screw (1) loosely tightened.
3. Adjust the height by sliding the screw in the slot (3)
Fig. 12
in attachment of
the footplate. Make sure it is the same on both sides. To help with this, there are
markings (4) in the attachments of the footplate
4. Tighten the screws (1)
Fig. 11
.
Fig. 18
Fig.19
Fig. 20
