10
art.nr
.8822165, Rev
. 2022-04 Publ. 2022-04-1
1
Panthera
AB reserves the right to make technical changes if required
SETTINGS
Raise the footplate
1. Loosen the screws slightly (1)
Fig. 11
, on both sides, with allen key 4 mm.
2. Adjust the height by sliding the screw in the slot at the footplates attachment
(3)
Fig. 12
Make sure it is the same height on both sides. To help for this there
are markings (4) in the footplates attachments.
3. Tighten the screws (1)
Fig 11
.
Footplate mounted extra high (”High position upper”)
Fig. 13
1. Loosen the screws (1)
Fig. 11
, completely from the nut (2), on both sides, wth
allen key 4 mm
2. Move the nut (2)
Fig. 11
to the lower hole of the footplate
Fig. 14
and mount
the footplate on the attachment with the screw (1) slightly tighten (1)
3. Adjust the height by sliding the screw in the slot (3)
Fig 12
in the footplate.
Check that is the same height on both sides. There are marks on the (4) attach-
ment of the footplate for help with this.
4. Tighten the screws (1)
Fig. 11
.
Fig. 14
Fig. 12
Fig. 13
Fig. 11
