11
art.nr
.8822165, Rev
. 2022-04 Publ. 2022-04-1
1
Panthera
AB reserves the right to make technical changes if required
SETTINGS
The footplate mounted low (”Low position, upper”)
Fig. 15
1. Loosen the screw (1) and nut (2), remove the footplate.
Fig. 11
2. Loosen the screw (5)
Fig. 16
, on both sides, with allen key 4 mm and remove
the attachment from the chassis.
3. Rotate the attachment 180°
Fig. 17
and mount it on the chassis with the screw
(5).
4. With the nut (2)
Fig. 11
, in the lower hole of the footplate,
Fig. 14
mount the
footplate to the attachment with the screw (1)
Fig. 11
loosely tightened .
5. Adjust the height by sliding the screw in the slot (3)
Fig. 12
in the attachment of
the footplate. Make sure it has the same height on both sides.
There are marks
on the (4) attachment of the footplate for help with this.
6. Tighten the screws (1)
Fig. 11
.
Fig. 15
Fig. 16
Fig. 17
