manualshive.com logo in svg

Panther Vinyl Sign, Руководство пользователя

Поделиться
Скачать
Panther Vinyl Sign Скачать руководство пользователя страница 35

6.2 

 Operational Problems

Some mechanical problems or failure during operation will cause some problems. The error messages shown on 
the LCM present the problem fi rst, and followed by recommended actions. If the problem still exists after the 
recommended actions have been done, have your cutting plotter serviced.  

This message indicates that there might be a problem on the X axis. Check 
if the drum is working well and if the media is well loaded.  Correct the 
problem and re-power on to reboot system.

This message indicates that there might be an obstruction to carriage relat-
ing to a problem on the Y axis.  Correct the problem and re-power on to 
reboot system.

This message indicates that the blade up/down sensor malfunctioned.  Re-
power on to re-boot system.  If the problem still exists, call tech support.

Make sure that your cutting space on the plotter is the same on the soft-
ware cutting spacer.  It is determined by pinch rollers.

Error, Check Media 
Or Y Motor 

Error, Check Carriage 
Sensor or VC Motor

Graph Was Clipped.
Data in Buffer

Error, Check Media
Or Drum or X Motor

6. Trouble Shooting                                                       6-2

Содержание Vinyl Sign














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды