manualshive.com logo in svg

Panther Vinyl Sign, Руководство пользователя

Поделиться
Скачать
Panther Vinyl Sign Скачать руководство пользователя страница 32

5. Maintenance

This chapter explains the basic maintenance (i.e. cleaning the cutting plotter) required for the cutting plotter. 
Except for the below mentioned, all other maintenance must be performed by a qualifi ed service technician.

5.1 

  Cleaning the Cutting Plotter

In order to keep the cutting plotter under good condition and best performance, you need to clean the machine 
properly and regularly. 

•   Unplug the cutting plotter before cleaning in order to prevent electrical 
shock.

•  Never use solvents, abrasive cleaners or strong detergents for cleaning. 
They may damage the surface of the cutting plotter and the moving parts. 

Cleaning Precaution ! 

Recommended Methods:

Gently wipe the cutting plotter surface with a lint-free cloth.  If necessary, clean with a damp cloth or an   
alcohol-immersed cloth. Wipe with water to rinse off any residue and dry with a soft, lint-free cloth.

Wipe all dust and dirt from the tool carriage rails.

Use a vacuum cleaner to empty any accumulated dirt and media residue beneath the pinch roller housing.

Clean the platen, paper sensors and pinch rollers with a damp cloth or an alcohol-immersed cloth, and dry 
with a soft, lint-free cloth.

Wipe dust and dirt from the stand.

•

•

•

•

•

5. Maintenance                                                              5-1

Содержание Vinyl Sign














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды